First of all, safety is the first priority. Before shutting down, press the emergency stop button and then cut off the power switch of the system. After finishing the work, cut off the power switch. The sequence is reversed when starting up. After starting up, the tool post needs to return to zero. If the downtime is too long, it needs За да работи за известно време, а пост инструмента трябва да изсъхне за няколко пъти, преди да обработва . като цяло, операцията с нулева възвръщаемост трябва да се извърши, ако машината бъде спряна за повече от половин час .
Before pressing the cycle start button, think about it for a few seconds for the sake of safety. When clamping tools and workpieces in a CNC vertical lathe, you can't use brute force impact force to operate brutally. The workpiece must be firmly clamped to start the spindle. Before normal operation of the machine tool, attention should be paid to whether the product clamping is firm and reliable, whether there is interference with the tool, and the hand is always placed at the position of the reset button or the emergency stop button during operation. Don't hesitate to find the tool or machine tool is abnormal, immediately press reset or emergency stop. When a part is processed, it is necessary to check whether the size of the product meets the requirements and whether the surface roughness meets the requirements of the drawing for the parts с висока точност .